“Big, Bright, Breathtaking”
APOLLO E2, mid-tower case comes with two 200mm breathtaking ARGB trio ring fans and tinted tempered glass side panel with a slid and clip in design. The abundant air flow can cool down the inside temperature in the case and prevent the inner component from being overheat.
Blow Your Mind
Dual built-in 200mm ARGB LED fans in the front panel not only bring a sensational visual feast, also generate high air flow through the case. Astonish in the cool world that APOLLO E2 has made.
A clean designed side glass panel without the thumb screws getting in the way visually. A unique designed mechanism which allows the side glass panel to slide and clip right into the case. Therefor you are able to function the 4mm tinted tempered glass with ease, which displays your internal rig components.
One Press and Sync All
Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the APOLLO E2 to minimize dust entering the case. The magnets holding the dust filter in place, makes it easy to remove and clean the washable dust filter.
Speed It Up, slow it down
A single easy push button, controls the 3 different speeds for the two 200mm ARGB fans. Aim for performance or keep is low and quite.
The accommodation inside APOLLO E2 is able to support up to eight 120mm fans. Mounting points for a 280mm, 240mm radiator at the top and front, 120 mm radiator in the rear.
|HDD cage||2 x 3.5″” or 1 x 2.5″”+1 x 3.5|
- Trapezoidal Tempered Glass Panel
- 2 Built-in 200mm ARGB Fans
- Tool Free Installation Tempered Glass Window
- Support RGB Motherboard Sync Software
- Power Cover Design
- Magnetic Dust Filter
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
|Product Name||APOLLO E2|
|Case Type||MID Tower|
|Motherboard Support||mini-ITX, microATX, ATX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support||“Top: 240 mm|
Front:360 mm, 280 mm
|Fan Support||“Top: 2 x 120mm , 2 x 140mm|
Front: 3 x 120mm , 2 x 140mm , 2 x 200mm
Rear: 1 x 120mm, 1 x 140mm
Bottom: 2 x 120mm”
|Pre-installed Fans||Front: 2 x 200mm ARGB Fans|
Rear: 1 x 120mm Fan
|Drive Bays||“2 x 3.5″” or 1 x 2.5″”+1 x 3.5″”(HDD Cage)|
3 x 2.5″””
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1|
|Clearance||CPU cooler height limitation: 170mm|
VGA length limitation: 300mm
PSU length limitation: 150mm
|Dimension(LxWxH)||370 x 216 x 462 mm|
|Net Weight||5.5 kg / 12.13 lb|